Gripping the reins of destruction , Made of steel in his hands. Holder of forces immortal, slaughtering all in his path.

I had a lovely day on Sat latheing away at my friends house . 

He cut a hole in my allooominummm plate and I machined up the axle / spacer type thingamy that fits in the plate and fits in the bearing which sits in the front sprocket. Now I just need some bolts the right length and maybe a few groovey speed holes in the plate and BINGOBANGO one outrigger. 

I also managed to tack some bits to the frame to hold the rear brake master cylinder and threw on a set of bars that I found kicking around ( just to get an idea of shape and length and aesthetics ) they ain't the right diameter but I do think that it's kind of in the right direction. 

I met a poet said she didn't like the smell of it , then took her cloths off in a restaurant for the hell of it. I met a Dj who lived in suclution, reality and sobriety were her only delusions.

Easy steps to make an outrigger support for the front sprocket. ( because the sprocket is 40mm further out , to clear the wide tyre, than it should be then I need a bearing to take the load off of the original engine bearing , other wise it will be knackered in no time.)

First I luckily got a bearing that "fits like a hand in a velvet glove"

Then . What's better than CAD Carboard Aided Design is if you have a bit of plastic. 

See through plastic is DA DA DAAAA . See through. So you can mark all the centres of the bolt holes.

Then I made it from metal and realised that even cleaning it up it will look a bit shit.

So I'm gunna make a wood template and get it cut from 10 mm alloooominumm. Then it will look Bobby Dazler.

These three long legged beauties are from the Instagram of shovelhead98austin 

I walk these streets with a loaded 6 string on my back, I play for keeps cud I might not make it back.( that was too easy. I'll make it trickier next time)

I've been in the shed today ( as you can expect) 

I tried to tick things off the list that keeps growing. 

I welded a lovely rack on the sissy bar, strengthened the mudguard that supports said Sissy bar. And started on the job that I have been putting off for so long. 

Cutting re-soldering and replacing the wiring harnes and mounting all the important thingamejigs. 

Unfortunately it's not a pan or shouvel head so there are quite a lot of Thingamejigs. 

I did make rather a smashing battery tray aswell . 

Unfortunately my phone is full of amazingly useful pictures so I had no memory to take any more. 

So here are some other photos instead.

Above is a bloody ace bike that Brad found whilst looking for picks of stoopid exhausts.

Lovely lady

Trike that is in the science museum

Mmmmmmmmmm

Last Wednesday I spent s lovely day wondering around London looking at cool stuff. 

I love cool stuff. It's so bloody cool. 

Abouve is the most amazing building. "The British Natural History Museum " 

Below is a lady enjoying coffee and a cake whilst every other fucker( except me ) is rushing around like headless chickens. 

I was standing on a corner of Winslow Arizona, when such a fine sight to see. There's a girl my lord in a flat bed Ford slowing down to take a look at me.

This weekend , apart from swearing at the rugby and watching a film about a bloke stuck on Mars, growing potatos in shit, I spent a happy few hours in the shed creating a fucking masterpiece. 

1st job was welding some brackets onto my GINORMOUSE sissy bar ( which look way better than my photography skills display) 

Then I covered my seat base in camping sleeping matts . Ready for some more skilled folk to dress it properly in the finest Otters pockets edged with the rearest ocelots gussets. 

Then when I was in the village the other day I spotted this killer bike. 

I could tell you who ownes it but I won't . 

I'll show you what I got, it's loud , mean , fast and dirty

Started making the "Comfy seat" 

Fiberglassing the seat base on a layer of shaped celotex. 

I'm gunna try and layer it with Virgin thighs wrapped in otters pockets with a layer of Hungarian ocelot pelt on top. 

Mmmmm comfy comfy miles.

Well you walk into a restaurant all strung out from the road . And you feel the eyes upon you as your shaking off the cold. You pretend it dosnt bother you but just want to explode. ( original please Alex)

Usual shit. I've been flat out like a lizard drinking. 

But I have managed to put some time in the Chopper.  And because I've been busy , I also have a little cash to buy this offset (1 1/2") 

It's bloody huge. 

But it fits . And the chain lines up. 

Now I gotta make an outrigger for it otherwise I'll knacker the bearing. ( too much torque , increased but a long lever) 

But I also spent a happy Sunday making a break calliper mount from an old sprocket , a rear brake torque arm . And doing some more to the sissy bar. 

But I did have a few hours where I just sat looking , stareing , thinking " oh fuck me , what to do next . What do I have parts for and how can I get around this " . 

Sometimes you just have to make a list . 

For me it's the only way I can see a way forward. 

Kicked like a mule and bit like a crocodile

I spent a little time filling the tunnel at the front of the tank , having raised it. 

With a little filler it should look like it grew there

Also started making the sissy bar with 16 mm stainless. Bent using a butane torch a tub of brute force and a whole bucket of ignorance . ( it looks bigger than it is , due to the small shed and photo angle) 

Torches blazed and sacred chants were frased , as they start to cry hands held to the sky.

I've been flat out buisy with work the last few weeks . So buisy that I haven't had time to build my chop. So here are some bike porn. 

Above is a photo Capt Buggernuts took whilst tripping over to Germany with our good mate Baggystench . It was taken in L & L choppers in Holland. 

This is a cool Sporty with a very short Exausty. 

This GTX built by a fella on Facebook ( I can't find his name right now but when I do I'll pass it on as he's pretty bloody good ) 

Found it. 

Roel sheffers ( Sheffers Enginereing. ) 

An finally bellow . My chop. 

My engineere friend finished moving the sprocket carrier inboard . So this weekend I fixed the rear wheel in place and worked out the chain offset( 1 3/4 " ) and iced the mudguard in place. Now I can get on with the rest as I can check that I don't put stuff in the way of the chain. 

Shut up you talk too loud.

It's hot and sunny get out and get lairy.

It's Not Very Far Away . Takes About Half a day, If We Travel by Dragonfly

This is Rich's chop . He built it last year and finished it just befor we rode to the Nurenburg ring and back. As all in tested projects it had a few Teathing problems on the way. We stripped them Feckin carbs a lot , in the rain. But I had had a go and it was Quick , handled well and felt solid. I did piss myself laughing when we found the longest cobbled road in Antwerp, watching Rich bounce about on his little seat.

Well after braking his foot ( We look like a right pair of invalids) he has stripped , painted tinkered and rebuilt. And it's looking bloody DapperDan. 

He got a friend ,Pete Weller to make him up this lovely stainless toast rack . 

Check out his blog http://heroesofcustom.blogspot.co.uk/?m=1

Its a new blog so it's worthy of support. So many are giving up "the Blog" due to The fact that it's a little more work . 

I like blogs there a little bit "magazine " too much stuff on line is Short and Sweet, like everybody attention span has dwindled.